Tripp Lite by Eaton B160-101-DPHDSI Video Extender Transmitter/Receiver

Part No. B160-101-DPHDSI

by Eaton Corporation

Tripp Lite by Eaton B160-101-DPHDSI Video Extender Transmitter/Receiver

1 Input Device - 1 Output Device - 328 ft (99974.40 mm) Range - 2 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - DisplayPort - Full HD - 1920 x 1080 - Twisted Pair - Category 6

Part No. B160-101-DPHDSI

by Eaton Corporation

$385.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberB160-101-DPHDSI
Brand NameTripp Lite by Eaton
Product ModelB160-101-DPHDSI
Product NameB160-101-DPHDSI Video Extender Transmitter/Receiver
Marketing Information

DP to DVI/HDMI Kit for Digital Signage or Extending Video in Schools or Trade Show Booths
This transmitter/receiver kit extends and distributes DisplayPort audio/video, RS-232 serial and IR (infrared) remote signals from a DisplayPort source, such as a laptop or media server, to a DVI or HDMI display. This point-to-point installation allows you to place a monitor, projector or television up to 328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. Plus, by adding a chain of unmanaged network switches, such as Tripp Lite's NG5, you can continue extending the distance between source and display up to 328 feet per switch.

Scale Up to a Multi-In, Multi-Out Installation to Take You Beyond 328 Feet
You can create an installation featuring multiple sources and displays by connecting a dedicated managed Ethernet network switch with Internet Group Management Protocol (IGMP), such as Tripp Lite's NSS-G16D2. By adding multiple managed switches, you can create a multi-in, multi-out installation with as many as 64 transmitters and 255 receivers. The IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays. Note: unmanaged switch installations are limited to two transmitter units. The number of receivers is limited to the number of ports remaining on the unmanaged switch. This transmitter/receiver extender kit is designed for use with a dedicated network switch. Connecting a switch used with other networking equipment will result in degraded or non-functional performance.

Transmits Crystal-Clear 1080p Video with Stereo Audio
The B160-101-DPHDSI supports video resolutions up to 1920 x 1080 (1080p) at 60 Hz with 24-bit True Color in a managed switch installation. It extends IR signals that control a DisplayPort source to a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps. This allows you to operate the source device's remote control (play, rewind, pause, etc.), while standing near the receiver located up to 328 feet away. An adapter cable is included for converting the receiver's HDMI signal for a DVI display.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Cat6 patch cable (such as Tripp Lite's N202-Series) can be used to connect the transmitter to the receiver or a network switch. Connect an additional display to the transmitter's local output with HDMI cable (such as Tripp Lite's P568- or P569-Series) to monitor the image being transmitted to a remote display.

TAA-Compliant for GSA Schedule Purchases
The B160-101-DPHDSI is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Typical Applications

  • Keep your video source in a secure location, with displays located elsewhere for viewing by the intended audience
  • Create an easily updatable video board communicating dynamic information, such as a restaurant menu or a theater schedule
  • Display arrivals, departures and up-to-the-minute information in an airport or train station
  • Duplicate audio/video content across multiple displays, show different content on multiple screens or create an impressive video wall made up of many monitors (multiple transmitters and receivers required)

System Requirements

  • Source device with DisplayPort output (media server, laptop)

Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Number of Output Devices Supported1
Maximum Operating Distance328 ft (99974.40 mm)
Video
Graphics ModesFull HD
Maximum Video Resolution1920 x 1080
Interfaces/Ports
Network (RJ-45)Yes
HDMI InYes
HDMI OutYes
DisplayPortYes
Number of Network (RJ-45) Ports2
Number of HDMI Inputs1
Number of HDMI Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Color FamilyBlack
Product ColorBlack
Transmitter Height0.46" (11.69 mm)
Transmitter Width1.98" (50.39 mm)
Transmitter Depth1.55" (39.37 mm)
Receiver Height0.46" (11.69 mm)
Receiver Width1.98" (50.39 mm)
Receiver Depth1.55" (39.37 mm)
Transmitter Weight (Approximate)3.20 oz (90.72 g)
Receiver Weight (Approximate)3.20 oz (90.72 g)
Miscellaneous
Package Contents
  • B160-001-DPSI Transmitter Unit
  • B160-100-HDSI Receiver Unit
  • IR-Out Cable
  • IR-In Cable
  • HDMI to DVI Adapter Cable
  • 2 x 3.5 mm to DB9 Adapter Cables (M/F)
  • 2 x External power supplies with 4.5 ft. cord (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V 2A)
  • 8 x International Plug Adapters (North America, Europe, U.K., Australia)
  • 2 x Sets of Mounting Hardware
  • 2 x Owner's Manuals
Country of OriginTaiwan
TAA CompliantYes
Environmentally FriendlyYes
Environmental ComplianceRestriction of Hazardous Substances (RoHS)
ConditionNo
UPC037332237798
Warranty
Limited Warranty1 Year
audio & video consoles/extenders (5)

Part No. B160-200-HSI

Tripp Lite by Eaton B160-200-HSI Video Extender Receiver - 2 Output Device - 328.08 ft (100000 mm) Range - 1 x Network (RJ-45) - 2 x HDMI Out - 1920 x 1440 - Twisted Pair - Category 6 - Rack-mountable, Wall Mountable, Pole-mountable

Eaton Tripp Lite Series 2-Port HDMI over IP Extender Receiver over Cat5/Cat6, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA - Receiver - Wired- Wall-mount - Max Transfer Distance: 100

Part No. B160-100-CSI

Tripp Lite by Eaton Receiver Unit - 1 Output Device - 328.08 ft (100000 mm) Range - 1 x Network (RJ-45) - WUXGA - 1920 x 1200 - Twisted Pair - Category 6 - Rack-mountable

Eaton Tripp Lite Series Component Video + Audio over IP Extender/Receiver, Cat5e/6, Serial and IR Control, 1080i, 328 ft. (100 m), TAA - Receiver - Wired - Wall-mount - 100M

connector cables (10)
switches & bridges (2)

Part No. NSS-G16D2

Tripp Lite by Eaton NSS-G16D2 Ethernet Switch - 16 Ports - Manageable - Gigabit Ethernet - 1000Base-X - 2 Layer Supported - Modular - 2 SFP Slots - Optical Fiber, Twisted Pair - 1U - Rack-mountable - 5 Year Limited Warranty

16 10/100/1000Mbps Port Gigabit L2 Web-Smart Managed Switch, 2 SFP Slots, 36 Gbps, Web, 8-Outlet 120V PDU/Surge Protect