Tripp Lite by Eaton Receiver Unit

Part No. B160-100-CSI

by Eaton Corporation

Tripp Lite by Eaton Receiver Unit

1 Output Device - 328.08 ft (100000 mm) Range - 1 x Network (RJ-45) - WUXGA - 1920 x 1200 - Twisted Pair - Category 6 - Rack-mountable

Part No. B160-100-CSI

by Eaton Corporation

$175.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberB160-100-CSI
Brand NameTripp Lite by Eaton
Product ModelB160-100-CSI
Product NameReceiver Unit
Marketing Information

The B160-100-CSI RGB Component Video + Audio over IP Extender Receiver works with a Tripp Lite B160-Series transmitter (sold separately) to extend and distribute component video + stereo audio, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite's NG5, you can continue extending the distance between source and display up to 328 feet per switch.

Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers by connecting dedicated managed Ethernet network switches with Internet Group Management Protocol (IGMP), such as Tripp Lite's NSS-G16D2. With a compatible B160-Series transmitter, this receiver works with any analog or digital source, including HDMI, VGA and DisplayPort™, allowing you to mix and match technologies and use existing source devices. An IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays.

The B160-100-CSI supports video resolutions up to 1080i. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps. It mounts to a wall, rack or pole using the included hardware.

Features

RGB Component Video + Stereo Audio, Serial and IR Control Signals over Cat5/6 Cabling

  • Receives IP-based audio + video transmitted point-to-point from a source 328 ft. away
  • Add low-cost network switches between transmitter and receiver to continue extending distance up to 328 ft. per switch


Create a Multi-In, Multi-Out Installation Using B160-Series Transmitters and Receivers

  • Connect up to 64 transmitters and 255 receivers through multiple dedicated managed network switches
  • IGMP-enabled switches allow centralized control over which sources show on which displays
  • Displays video from any analog or digital source, so you can mix and match technologies and use existing sources and monitors


Enhanced Technical Features

  • Supports video resolutions up to 1080i
  • Uses H.264 video compression standard
  • Transmits on 20-60 kHz IR frequency
  • Extends IR control signals that control a source from a remote display
  • Supports RS-232 serial baud rates up to 57600 Bps


Plug-and-Play Functionality

  • No software or drivers required
  • Hardware included for mounting on wall, rack or pole
  • Compatible with all Tripp Lite B160-Series A/V over IP transmitters


TAA-Compliant

  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

More from the Manufacturer

Product TypeVideo Extender Receiver
Technical Information
Connectivity TechnologyWired
Number of Output Devices Supported1
Maximum Operating Distance328.08 ft (100000 mm)
Video
Graphics ModesWUXGA
Maximum Video Resolution1920 x 1200
Interfaces/Ports
Network (RJ-45)Yes
Number of Network (RJ-45) Ports1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Color FamilyBlack
Product ColorBlack
Receiver Height1.17" (29.70 mm)
Receiver Width5.04" (128 mm)
Receiver Depth3.94" (100 mm)
Form FactorRack-mountable
Receiver Weight (Approximate)1.59 lb (720 g)
Miscellaneous
Package Contents
  • Receiver Unit
  • External Power Supply (Input: 100-240v, 50/60 hz, 0.5a; Output: 5v 2A)
  • Plug Adapters for U.S., U.K., Europe and Australia
  • IR-In Cable
  • 3.5 mm to db9 Adapter Cable (m/m)
  • Mounting Hardware
  • Owner's Manual
Country of OriginTaiwan
TAA CompliantYes
Environmentally FriendlyYes
Environmental ComplianceRestriction of Hazardous Substances (RoHS)
ConditionNo
UPC037332196767
Warranty
Limited Warranty1 Year
audio & video consoles/extenders (4)

Part No. B160-001-VSI

Tripp Lite by Eaton B160-001-VSI Video Extender Transmitter - 1 Input Device - 328.08 ft (100000 mm) Range - 1 x Network (RJ-45) - 1 x VGA In - 1 x HDMI Out - 1920 x 1440 - Twisted Pair - Category 6 - Rack-mountable, Wall Mountable, Pole-mountable

Eaton Tripp Lite Series VGA over IP Extender Transmitter over Cat5/Cat6, RS-232Serial and IR Control, 1920 x 1440 (1080p), 328 ft. (100 m), TAA - Transmitter -Wired - Wall-mount - 100M

Part No. B160-001-DPSI

Tripp Lite by Eaton Transmitter Unit - 1 Input Device - 656.17 ft (200000 mm) Range - 1 x Network (RJ-45) - 1 x HDMI Out - DisplayPort - 1920 x 1440 - Twisted Pair - Category 6 - Wall Mountable, Rack-mountable, Pole-mountable

DisplayPort over IP Extender Transmitter over Cat5/Cat6, RS-232 Serial and IR Control, 1920 x 1080, 328 ft. (100 m), TAA

connector cables (6)
switches & bridges (2)

Part No. NSS-G16D2

Tripp Lite by Eaton NSS-G16D2 Ethernet Switch - 16 Ports - Manageable - Gigabit Ethernet - 1000Base-X - 2 Layer Supported - Modular - 2 SFP Slots - Optical Fiber, Twisted Pair - 1U - Rack-mountable - 5 Year Limited Warranty

16 10/100/1000Mbps Port Gigabit L2 Web-Smart Managed Switch, 2 SFP Slots, 36 Gbps, Web, 8-Outlet 120V PDU/Surge Protect