Tripp Lite by Eaton B160-001-HDSI Video Extender Transmitter

Part No. B160-001-HDSI

by Eaton Corporation

Tripp Lite by Eaton B160-001-HDSI Video Extender Transmitter

1 Input Device - 328.08 ft (100000 mm) Range - 1 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - 1920 x 1440 - Twisted Pair - Category 6 - Wall Mountable, Rack-mountable, Pole-mountable

Part No. B160-001-HDSI

by Eaton Corporation

$214.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberB160001HDSI
Brand NameTripp Lite by Eaton
Product ModelB160-001-HDSI
Product NameB160-001-HDSI Video Extender Transmitter
Marketing Information

The B160-001-HDSI HDMI/DVI Video + Audio with RS-232 Serial and IR Control over IP Transmitter extends and distributes HDMI or DVI audio/video, RS-232 serial and IR(infrared) remote signals through a dedicated Ethernet network switch* located up to 328 feet(100 m) away. With an additional 328 feet between the switch and the receiver(sold separately), the total maximum distance from source to display is 656 feet(200 m).

Designed for managed network switches with IGMP, which allow login and remote management via switch interface, the B160-001-HDSI displays a single source on a single display or distributes a single signal to multiple displays. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.**

The B160-001-HDSI supports video resolutions up to 1920 x 1440, including 1080p, though it's limited to the maximum resolution of the receiver(sold separately). You can send the HDMI or DVI video source(a DVI adapter cable is included) to any analog or digital display, including VGA and DisplayPort. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.

Compatible with Tripp Lite's B160-100-DPSI, B160-100-HDSI, B160-200-HSI and B160-100-VSI IP receivers.


*B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.

**Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.

Features

Extends and Distributes HDMI/DVI A/V, Serial and IR Control Signals over Cat5/6 Cabling

  • Converts source video to IP-based signal transmitted to and distributed through network switch
  • Extends signal up to 328 ft.(100 m) from switch
  • Can also connect directly to receiver up to 328 ft. away

Designed for Managed Network Switches with IGMP

  • Allows login and remote management via switch interface
  • Display single source on single display or distribute single signal to multiple displays
  • Video source(adapter cable included for connecting DVI source) can be sent to any analog or digital display, including VGA and DisplayPort
  • Connect up to 64 transmitters and 255 receivers in single managed switch installation
  • HDMI output for connecting a local display

Enhanced Technical Features

  • Supports video resolutions up to 1920 x 1440, including 1080p
  • Uses H.264 video compression standard
  • Transmits on 20-60 kHz IR frequency
  • Extends IR control signals that control a source from a remote display
  • Supports RS-232 serial baud rates up to 57600 Bps
  • HDCP and 3D compatible when paired with an HDMI or DisplayPort receiver(not compatible with VGA receiver)

Plug and Play Functionality

  • No software or drivers required
  • Hardware included for mounting on wall, rack or pole
  • Compatible with B160-100-DPSI, B160-100-HDSI, B160-200-HSI and B160-100-VSI IP receivers

TAA-Compliant

  • Compliant with the Federal Trade Agreements Act(TAA) for GSA Schedule purchases

More from the Manufacturer

Product TypeVideo Extender Transmitter
Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Maximum Operating Distance328.08 ft (100000 mm)
Video
Maximum Video Resolution1920 x 1440
Interfaces/Ports
Network (RJ-45)Yes
HDMI InYes
HDMI OutYes
Serial PortYes
Number of Network (RJ-45) Ports1
Number of HDMI Inputs1
Number of HDMI Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Form Factor
  • Wall Mountable
  • Rack-mountable
  • Pole-mountable
Miscellaneous
Package Contents
  • B160-001-HDSI Video Extender Transmitter
  • External power supply w/NEMA 1-15P plug (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
  • Plug Adapters for U.S., U.K., Europe and Australia
  • IR-Out Cable
  • HDMI-to-DVI Adapter Cable
  • Mounting Hardware
  • Owner's Manual
Country of OriginTaiwan
TAA CompliantYes
Environmentally FriendlyYes
ConditionNo
UPC0037332196644
Warranty
Limited Warranty1 Year
audio & video consoles/extenders (5)

Part No. B160-200-HSI

Tripp Lite by Eaton B160-200-HSI Video Extender Receiver - 2 Output Device - 328.08 ft (100000 mm) Range - 1 x Network (RJ-45) - 2 x HDMI Out - 1920 x 1440 - Twisted Pair - Category 6 - Rack-mountable, Wall Mountable, Pole-mountable

Eaton Tripp Lite Series 2-Port HDMI over IP Extender Receiver over Cat5/Cat6, RS-232 Serial and IR Control, 1080p 60 Hz, 328 ft. (100 m), TAA - Receiver - Wired- Wall-mount - Max Transfer Distance: 100

Part No. B160-100-CSI

Tripp Lite by Eaton Receiver Unit - 1 Output Device - 328.08 ft (100000 mm) Range - 1 x Network (RJ-45) - WUXGA - 1920 x 1200 - Twisted Pair - Category 6 - Rack-mountable

Eaton Tripp Lite Series Component Video + Audio over IP Extender/Receiver, Cat5e/6, Serial and IR Control, 1080i, 328 ft. (100 m), TAA - Receiver - Wired - Wall-mount - 100M

connector cables (30)
mounting kits (1)
switches & bridges (2)

Part No. NSS-G16D2

Tripp Lite by Eaton NSS-G16D2 Ethernet Switch - 16 Ports - Manageable - Gigabit Ethernet - 1000Base-X - 2 Layer Supported - Modular - 2 SFP Slots - Optical Fiber, Twisted Pair - 1U - Rack-mountable - 5 Year Limited Warranty

16 10/100/1000Mbps Port Gigabit L2 Web-Smart Managed Switch, 2 SFP Slots, 36 Gbps, Web, 8-Outlet 120V PDU/Surge Protect