Tripp Lite by Eaton B160-001-HDSI Video Extender Receiver

Part No. B160-100-HDSI

by Eaton Corporation

Tripp Lite by Eaton B160-001-HDSI Video Extender Receiver

1 Output Device - 328.08 ft (100000 mm) Range - 1 x Network (RJ-45) - 1 x HDMI Out - 1920 x 1440 - Twisted Pair - Category 6 - Wall Mountable, Rack-mountable, Pole-mountable

Part No. B160-100-HDSI

by Eaton Corporation

$160.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberB160100HDSI
Brand NameTripp Lite by Eaton
Product ModelB160-100-HDSI
Product NameB160-001-HDSI Video Extender Receiver
Marketing Information

The B160-100-HDSI HDMI Audio/Video with RS-232 Serial and IR Control over IP Receiver extends and distributes HDMI/DVI video(adapter cable included for connecting DVI display), RS-232 serial and IR(infrared) remote signals through a dedicated Ethernet network switch* located up to 328 feet(100 m) away. With an additional 328 feet between the switch and the transmitter(sold separately), the total maximum distance from source to display is 656 feet(200 m).

The B160-100-HDSI is designed for managed network switches with IGMP, which allow login and remote management via switch interface. You can connect up to 64 transmitters and 255 receivers in a single managed switch installation.**

The B160-100-HDSI supports video resolutions up to 1920 x 1080(1080p) at 60 Hz. It works with any analog or digital source, including DisplayPort and VGA. It extends IR control signals that control a source, such as a Blu-ray™ player, from a remote display, as well as RS-232 signals at serial baud rates up to 57600 Bps.

Compatible with Tripp Lite's B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters.

*B160-Series designed for use with dedicated network switch. Connecting to a switch used with other networking equipment will result in degraded or non-functional performance.

**Unmanaged switch installations are limited to two transmitter units. Number of receivers is limited to number of ports remaining on unmanaged switch.

Features

Extends and Distributes HDMI/DVI A/V, Serial and IR Control Signals over Cat5/6 Cabling

  • Converts source video to IP-based signal transmitted to and distributed through network switch
  • Adapter cable included for connecting a DVI display
  • Extends signal up to 328 ft.(100 m) from switch
  • Can also connect directly to transmitter up to 328 ft. away

Designed for Managed Network Switches with IGMP

  • Allows login and remote management via switch interface
  • Works with any analog or digital source, including DisplayPort and VGA
  • Connect up to 64 transmitters and 255 receivers in single managed switch installation

Enhanced Technical Features

  • Supports video resolutions up to 1920 x 1080(1080p) @ 60 Hz
  • Uses H.264 video compression standard
  • Transmits on 20-60 kHz IR frequency
  • Extends IR control signals that control a source from a remote display
  • Supports RS-232 serial baud rates up to 57600 Bps
  • HDCP and 3D compatible when used with a DisplayPort or HDMI transmitter (not compatible with VGA transmitter)

Plug and Play Functionality

  • No software or drivers required
  • Hardware included for mounting on wall, rack or pole
  • Compatible with B160-001-DPSI, B160-001-HDSI and B160-001-VSI transmitters

TAA-Compliant

  • Compliant with the Federal Trade Agreements Act(TAA) for GSA Schedule purchases

More from the Manufacturer

Product TypeVideo Extender Receiver
Technical Information
Connectivity TechnologyWired
Number of Output Devices Supported1
Maximum Operating Distance328.08 ft (100000 mm)
Video
Maximum Video Resolution1920 x 1440
Interfaces/Ports
Network (RJ-45)Yes
HDMI OutYes
Serial PortYes
Number of Network (RJ-45) Ports1
Number of HDMI Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Form Factor
  • Wall Mountable
  • Rack-mountable
  • Pole-mountable
Miscellaneous
Package Contents
  • B160-001-HDSI Video Extender Receiver
  • External power supply w/NEMA 1-15P plug (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
  • Plug Adapters for U.S., U.K., Europe and Australia
  • IR-In Cable
  • HDMI-to-DVI Adapter Cable
  • Mounting Hardware
  • Owner's Manual
Country of OriginTaiwan
TAA CompliantYes
Environmentally FriendlyYes
ConditionNo
UPC037332196712
Warranty
Limited Warranty1 Year
audio & video consoles/extenders (4)

Part No. B160-001-VSI

Tripp Lite by Eaton B160-001-VSI Video Extender Transmitter - 1 Input Device - 328.08 ft (100000 mm) Range - 1 x Network (RJ-45) - 1 x VGA In - 1 x HDMI Out - 1920 x 1440 - Twisted Pair - Category 6 - Rack-mountable, Wall Mountable, Pole-mountable

Eaton Tripp Lite Series VGA over IP Extender Transmitter over Cat5/Cat6, RS-232Serial and IR Control, 1920 x 1440 (1080p), 328 ft. (100 m), TAA - Transmitter -Wired - Wall-mount - 100M

Part No. B160-001-DPSI

Tripp Lite by Eaton Transmitter Unit - 1 Input Device - 656.17 ft (200000 mm) Range - 1 x Network (RJ-45) - 1 x HDMI Out - DisplayPort - 1920 x 1440 - Twisted Pair - Category 6 - Wall Mountable, Rack-mountable, Pole-mountable

DisplayPort over IP Extender Transmitter over Cat5/Cat6, RS-232 Serial and IR Control, 1920 x 1080, 328 ft. (100 m), TAA

connector cables (30)
switches & bridges (2)

Part No. NSS-G16D2

Tripp Lite by Eaton NSS-G16D2 Ethernet Switch - 16 Ports - Manageable - Gigabit Ethernet - 1000Base-X - 2 Layer Supported - Modular - 2 SFP Slots - Optical Fiber, Twisted Pair - 1U - Rack-mountable - 5 Year Limited Warranty

16 10/100/1000Mbps Port Gigabit L2 Web-Smart Managed Switch, 2 SFP Slots, 36 Gbps, Web, 8-Outlet 120V PDU/Surge Protect