Tripp Lite by Eaton DVI Over Cat5 Active Extender Remote Unit

Part No. B140-1A0

by Eaton Corporation

Tripp Lite by Eaton DVI Over Cat5 Active Extender Remote Unit

1 Input Device - 1 Output Device - 200 ft (60960 mm) Range - 1 x Network (RJ-45) - 1 x DVI Out - Full HD - 1920 x 1080 - Twisted Pair - Category 6

Part No. B140-1A0

by Eaton Corporation

$204.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberB140-1A0
Brand NameTripp Lite by Eaton
Product ModelB140-1A0
Product NameDVI Over Cat5 Active Extender Remote Unit
Marketing Information

The B140-1A0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-1A0 is compatible with all operating systems, and is plug and play, with no software or drivers required. It features a built-in Equalization control for adjustment of the video image. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1A0 to a display using a Tripp Lite P561-Series DVI cable (not included). Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 150 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 200 ft..

Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active receiver) to each channel of the B140-002 or B140-004, for a total of 4 displays per channel. (An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be extended up to 175 ft..

Product TypeVideo Extender Receiver
Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Number of Output Devices Supported1
Maximum Operating Distance200 ft (60960 mm)
Video
Graphics ModesFull HD
Maximum Video Resolution1920 x 1080
Interfaces/Ports
Network (RJ-45)Yes
DVI OutYes
Number of Network (RJ-45) Ports1
Number of DVI Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Receiver Height1" (25.40 mm)
Receiver Width2.50" (63.50 mm)
Receiver Depth3.60" (91.44 mm)
Miscellaneous
Package Contents
  • B140-1A0 DVI over Cat5 Active Extender Remote Unit
  • Mounting Hardware
  • Screwdriver for adjustment of Equalization
  • External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
  • Owner's Manual
Certifications & StandardsTAA
Country of OriginTaiwan
TAA CompliantYes
Environmentally FriendlyYes
ConditionNo
UPC0037332156631
Warranty
Limited Warranty1 Year
audio & video consoles/extenders (5)
connector cables (9)
mounting kits (1)
video switchboxes (1)

Part No. B140-202

Tripp Lite by Eaton DVI over Cat5 2x2 Matrix Switch, 2-Port - 1920 x 1200 - WUXGA - 2 x 2 - Display

Eaton Tripp Lite Series 2x2 DVI over Cat5/Cat6 Matrix Splitter Switch, Video Transmitter, Up to 200 ft. (60 m), TAA