Tripp Lite by Eaton DVI over Cat5 Extender/Splitter, 2-Port Local Transmitter Unit

Part No. B140-002

by Eaton Corporation

Tripp Lite by Eaton DVI over Cat5 Extender/Splitter, 2-Port Local Transmitter Unit

1 Input Device - 2 Output Device - 200 ft (60960 mm) Range - 2 x Network (RJ-45) - 1 x DVI In - Full HD - 1920 x 1080 - Twisted Pair - Category 6

Part No. B140-002

by Eaton Corporation

$97.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberB140-002
Brand NameTripp Lite by Eaton
Product ModelB140-002
Product NameDVI over Cat5 Extender/Splitter, 2-Port Local Transmitter Unit
Marketing Information

The B140-002 transmits a DVI-D Single-Link signal to two monitors up to 200 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24Awg Solid Wire Cat5e/6 cable (Tripp Lite's N202-Series). The B140-002 is compatible with all operating systems, and is plug and play, with no software or drivers required. It also comes with mounting hardware that allows it to be wallmounted, rackmounted, or pole-mounted. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Installation is simple. Connect the B140-002 transmitter to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect a Tripp Lite B140-series receiver (not included) to each display using a Tripp Lite P561-Series DVI cable (not included). Finally, each remote receiver is connected to an RJ45 port on the B140-002 using a single Cat5e/6 cable.

For longer extension distances, use a B140-1A0 or B140-1A0-WP active receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 150 ft., or a 1024 x 768 @ 60Hz signal up to 200 ft..

For shorter extension distances, use a B140-1P0 or B140-1P0-WP passive receiver unit to extend a 1920 x 1080 @ 60Hz signal up to 50 ft., or a 1024 x 768 @ 60Hz signal up to 100 ft..

Further expand the range and number of monitors by using a B140-110 repeater unit. Add up to four remote units (three repeaters and one active receiver) to each channel of the B140-002, for a total of 4 displays per channel. (An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. from each repeater to the next unit in the channel, or a 1024 x 768 @ 60Hz signal can be extended up to 175 ft..

Product TypeVideo Extender Transmitter
Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Number of Output Devices Supported2
Maximum Operating Distance200 ft (60960 mm)
Video
Graphics ModesFull HD
Maximum Video Resolution1920 x 1080
Interfaces/Ports
Network (RJ-45)Yes
DVI InYes
Number of Network (RJ-45) Ports2
Number of DVI Inputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Color FamilyBlack
Product ColorBlack
Transmitter Height1" (25.40 mm)
Transmitter Width2.50" (63.50 mm)
Transmitter Depth3.60" (91.44 mm)
Miscellaneous
Package Contents
  • B140-002 DVI Over Cat5 Extender/Splitter, 2-Port Local Transmitter Unit
  • Mounting Hardware
  • External Power Supply (Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A)
  • Owner's Manual
Certifications & StandardsTAA
Country of OriginTaiwan
TAA CompliantYes
Environmentally FriendlyYes
ConditionNo
UPC0037332156709
Warranty
Limited Warranty1 Year
audio & video consoles/extenders (5)

Part No. B140-1A0-WP-1

Tripp Lite by Eaton B140-1A0-WP-1 DVI over Cat5/6 Extender - 1 Output Device - 200 ft (60960 mm) Range - 1 x Network (RJ-45) - 1 x DVI Out - Full HD - 1920 x 1080 - Twisted Pair - Category 6 - Wall Mountable

DVI over Cat5/6 Extender, Extended-Range Video Wallplate Receiver, 1920 x 1080 @60 Hz, Up to 200 Ft, RJ45 Keystone Jack

connector cables (9)
mounting kits (1)