Tripp Lite series NPOE-EXT-1G30 Network Extender

Part No. NPOE-EXT-1G30

by Eaton Corporation

Tripp Lite series NPOE-EXT-1G30 Network Extender

2 x Network (RJ-45) - 328.08 ft (100000 mm) Extended Range - Plastic - Black

Part No. NPOE-EXT-1G30

by Eaton Corporation

$183.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberNPOE-EXT-1G30
Brand NameTripp Lite series
Product ModelNPOE-EXT-1G30
Product NameNPOE-EXT-1G30 Network Extender
Marketing Information

Gigabit Extender Lets You Cascade Your Existing PoE/PoE+ Connection up to 500 Meters

This single-port connector allows you to extend the connection between your powered source device, such as a PoE (Power over Ethernet) switch, and a remote PoE device an extra 328 feet (100 meters). In addition, by cascading as many as four NPOE-EXT-1G30 extenders, you can extend that connection as far as 1,640 feet (500 meters) total. Just connect the extender between two sections of Cat5e/6/6a cable up to 328 feet each.

Saves You Time and Money on Unnecessary Equipment Updates

The compact PoE/PoE+ extender delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables, eliminating the need to install new AC power lines and electrical outlets. This cost-effective extender sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. It also automatically detects PoE/PoE+ equipment and protects it from being damaged by incorrect installation.

Supports Power over Ethernet to Save You Money and Give You More Installation Choices

Because this extender supports PoE, it can supply the power to operate compatible IEEE 802.3at/af PoE devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings. It supports half/full-duplex 1 Gbps communication for sending and receiving data simultaneously, and protects your PoE device against short circuits and overloads.

Simple Plug-and-Play Installation Has Your Device Connected in Minutes

No configuration or software is required to add the NPOE-EXT-1G30 to your LAN. Just connect your switch or network jack and your PoE/PoE+ device to the shielded RJ45 Power + Data ports using existing Cat5e/6/6a cable. LEDs indicate the unit is receiving power and is ready to transmit data.

Designed for Installation Almost Anywhere

Mounting holes are featured for installing the extender on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.


Product TypeNetwork Extender
Technical Information
Maximum Extended Range328.08 ft (100000 mm)
Maximum Data Transfer Rate128 MB/s
Interfaces/Ports
Network (RJ-45)Yes
Number of Network (RJ-45) Ports2
Physical Characteristics
Color FamilyBlack
Product ColorBlack
Product MaterialPlastic
Miscellaneous
Package Contents
  • NPOE-EXT-1G30 Network Extender
  • Owner's manual
Environmental Compliance
  • Restriction of Hazardous Substances (RoHS)
  • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
ConditionNo
UPC0037332236142
Warranty
Limited Warranty3 Year
connector cables (4)
power injectors/splitters (1)