Tripp Lite by Eaton B127M-101-H Video Extender Transmitter/Receiver

Part No. B127M-101-H

by Eaton Corporation

Tripp Lite by Eaton B127M-101-H Video Extender Transmitter/Receiver

1 Input Device - 1 Output Device - 230 ft (70104 mm) Range - 2 x Network (RJ-45) - 1 x HDMI In - 1 x HDMI Out - 4K UHD - 3840 x 2160 - Twisted Pair - Category 6 - Rack-mountable

Part No. B127M-101-H

by Eaton Corporation

$323.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberB127M101H
Brand NameTripp Lite by Eaton
Product ModelB127M-101-H
Product NameB127M-101-H Video Extender Transmitter/Receiver
Marketing Information

All-in-One HDMI Extender Kit Ideal for Medical Environments
This complete transmitter and receiver system is recommended for transmitting 4K video for medical applications in hospitals, clinics, physicians' offices and other medical environments where the source and display are farther apart than conventional A/V cables allow. The extender kit conforms to strict EMI/RFI and ESD requirements.

Extends a 4K A/V Transmission Up to 230 ft.
The B127M-101-H extends 4K signals from an HDMI source device to an HDMI display up to 230 feet (70 meters) away via user-supplied Cat6 cabling.

Transmits Crystal-Clear 4K Video with Multi-Channel Audio
The HDCP 2.2-compliant B127M-101-H supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with 36-bit Deep Color, 4:4:4 chroma subsampling and full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on a 4K display. Built-in equalization allows you to fine-tune the image quality at the remote display.

Meets EMI/RFI and ESD Requirements Necessary for Use in Medical Applications
The transmitter and receiver both meet CISPR 11- Group 1 Class A and IEC 61000-4-2 (ESD) Test level 4 standards for environments with strict EMI/RFI and ESD limitations. They are approved for medical applications where reducing electrical interference is vital to the proper functioning of equipment.

Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution
To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter's local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.

Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers the receiver over Cat6 cable. LEDs on both units will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver where needed without worrying about finding a nearby AC outlet.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as Tripp Lite's P568- or P569-Series). Then, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N262-Series). Finally, connect the receiver to the display with another user-supplied HDMI cable.

TAA-Compliant for GSA Schedule Purchases
The B127M-101-H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Typical Applications

  • Connect a laptop for a video or PowerPoint presentation in a hospital conference room, where the source device changes frequently
  • Extend video signals from one room to another using Cat6 cable, which can pass through conduit to meet building codes
  • Gain flexibility in where the units are placed, with the freedom to move and relocate the PoC receiver away from an AC outlet
  • Improve the line of sight for digital signage in a hospital, clinic, doctor's office or other medical setting

Product TypeVideo Extender Transmitter/Receiver
Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Number of Output Devices Supported1
Maximum Operating Distance230 ft (70104 mm)
Video
Graphics Modes4K UHD
Maximum Video Resolution3840 x 2160
Interfaces/Ports
Network (RJ-45)Yes
HDMI InYes
HDMI OutYes
Number of Network (RJ-45) Ports2
Number of HDMI Inputs1
Number of HDMI Outputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Color FamilyBlack
Product ColorBlack
Transmitter Height1.06" (27 mm)
Transmitter Width4.53" (115 mm)
Transmitter Depth2.46" (62.40 mm)
Receiver Height1.06" (27 mm)
Receiver Width4.53" (115 mm)
Receiver Depth2.46" (62.40 mm)
Form FactorRack-mountable
Transmitter Weight (Approximate)1 lb (453.59 g)
Receiver Weight (Approximate)1 lb (453.59 g)
Miscellaneous
Package Contents
  • Local transmitter
  • Remote receiver
  • External power supply (Input: 100-240V, 50/60 Hz, 0.6A; Output: 24V 1A)
  • 4 x International plug adapters (North America, Europe, U.K. and Australia)
  • Mounting Hardware
  • Owner's Manual
Country of OriginTaiwan
TAA CompliantYes
Environmental Compliance
  • Restriction of Hazardous Substances (RoHS)
  • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
ConditionNo
UPC0037332262677
Warranty
Limited Warranty1 Year
connector cables (12)