Tripp Lite by Eaton B127-002-D2H Video Extender Transmitter/Receiver

Part No. B127-002-D2H

by Eaton Corporation

Tripp Lite by Eaton B127-002-D2H Video Extender Transmitter/Receiver

1 Input Device - 2 Output Device - 125 ft (38100 mm) Range - 4 x Network (RJ-45) - 1 x HDMI In - DisplayPort - 4K - 3840 x 2160 - Twisted Pair - Category 6 - Rack-mountable

Part No. B127-002-D2H

by Eaton Corporation

$279.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberB127-002-D2H
Brand NameTripp Lite by Eaton
Product ModelB127-002-D2H
Product NameB127-002-D2H Video Extender Transmitter/Receiver
Marketing Information

DP to HDMI Splitter for Digital Signage or Extending Video in Schools or Trade Show Booths
This complete 2-port transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127-002-D2H extends 4K video and stereo audio signals from a DisplayPort (DP) source device to two HDMI displays up to 125 feet (38.1 meters) away via user-supplied Cat6 cabling.

Transmits Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 Color
The B127-002-D2H supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby AC-3 and 8-channel LPCM digital audio. Built-in equalization automatically fine-tunes the image quality at the remote displays with no time-consuming manual fiddling needed. It's compatible with HDCP 2.2, DisplayPort 1.2a, EDID and HDMI 2.0 standards for carrying HDR (high dynamic range) signals. It also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.

Built-In PoC Technology Provides Receiver Power to Avoid Bulky External Power Bricks
Built-in Power over Cable (PoC) technology powers the low-profile receivers over Cat6 cable. Green and orange LEDs on the transmitter and receivers will light up to indicate the system is receiving power and a signal is being transmitted.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing the units on walls, poles or 19-inch racks. Connect the transmitter to the source with a DisplayPort cable (Tripp Lite P580-Series) and the receivers to their displays with HDMI cable (such as Tripp Lite's P568- or P569-Series). Connect the transmitter to the two receivers using Cat6 patch cable (Tripp Lite N202-Series).

TAA-Compliant for GSA Schedule Purchases
The B127-002-D2H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Typical Applications

  • Connect a media server, cable/satellite box, gaming system or other home theater component to multiple large-screen 4K televisions or projectors
  • Upgrade the video quality of your trade show presentation or digital signage installation in a commercial or educational setting to 4K x 2K

System Requirements

  • Source device with DisplayPort output (media server, laptop)
  • Display devices with HDMI input (HDTV, projector, monitor)

More from the Manufacturer

Product TypeVideo Extender Transmitter/Receiver
Technical Information
Connectivity TechnologyWired
Number of Input Devices Supported1
Number of Output Devices Supported2
Maximum Operating Distance125 ft (38100 mm)
Video
Graphics Modes4K
Maximum Video Resolution3840 x 2160
Interfaces/Ports
Network (RJ-45)Yes
HDMI InYes
DisplayPortYes
Number of Network (RJ-45) Ports4
Number of HDMI Inputs1
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Color FamilyBlack
Product ColorBlack
Transmitter Height1.06" (26.92 mm)
Transmitter Width4.53" (115.06 mm)
Transmitter Depth2.46" (62.48 mm)
Receiver Height1.06" (26.92 mm)
Receiver Width4.53" (115.06 mm)
Receiver Depth2.46" (62.48 mm)
Form FactorRack-mountable
Transmitter Weight (Approximate)7.20 oz (204.12 g)
Receiver Weight (Approximate)7.20 oz (204.12 g)
Miscellaneous
Package Contents
  • Transmitter Unit
  • 2 x Receiver Units
  • External Power Supply (Input: 100-240V)
  • 4 x International Plug Adapters (North America, Europe, U.K. and Australia)
  • Mounting Hardware
  • Owner's Manual
Country of OriginTaiwan
TAA CompliantYes
Environmentally FriendlyYes
Environmental Compliance
  • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
  • Restriction of Hazardous Substances (RoHS)
ConditionNo
UPC0037332239020
Warranty
Limited Warranty1 Year
connector cables (6)