Tripp Lite by Eaton SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS

Part No. SMART1000RM2UL

by Eaton Corporation

Tripp Lite by Eaton SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS

2U Rack/Tower - AVR - 2.70 Hour Recharge - 8.30 Minute Stand-by - 120 V AC Input - 120 V AC Output - Serial Port - 6 x NEMA 5-15R Receptacle(s)

Part No. SMART1000RM2UL

by Eaton Corporation

$2013.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberSMART1000RM2UL
Brand NameTripp Lite by Eaton
Product LineSmartPro
Product ModelSMART1000RM2UL
Product NameSmartPro SMART1000RM2UL 1kVA Rack/Tower UPS
Marketing Information

Reliable LiFePO4 Battery Backup Offers Longer Life and Less Weight than Lead Acid Battery

This Tripp Lite SmartPro® UPS lithium battery backup features a state-of-the-art lithium iron phosphate (LiFePO4) internal battery with longer life, more cycles and faster recharge. It more than doubles the service life of an equivalent lead acid battery, and offers up to three times more charge/discharge cycles. It recharges to 100% capacity in less than three hours, making the lithium UPS system an ideal backup in case of power outage. The LiFePO4 battery has 60% the weight of an equivalent lead acid battery, which reduces the overall UPS weight.

120-Volt Battery Backup Keeps Equipment Operating Through Short Power Failures

The SMART1000RM2UL provides up to 20 minutes (half load) and 8.3 minutes (full load) of battery backup, as well as AC power protection, for critical server, network and telecom equipment. In case of a prolonged blackout, the single-phase lithium UPS system gives you enough time to save important data and perform an orderly system shutdown.

Automatic Voltage Regulation (AVR) Conserves Battery Power

With an 800W capacity (1000VA), the line-interactive UPS system with automatic voltage regulation (AVR) maintains regulated 120V nominal output over an input range of 83V-147V without using battery power. Conserving power allows your LiFePO4 battery to last longer and maintain full capacity until needed.

6 Outlets Protect Your Mission-Critical Rack Equipment

Plug your equipment into the six NEMA 5-15R outlets. Four outlets are split into two dual-outlet load banks that are switchable via network interface. These four outlets let you power connected equipment on and off remotely to reset or reboot connected equipment or to shed less significant loads to extend battery runtime for more critical equipment. All six outlets are protected by 570-joule network-grade surge protection to fight off damaging power surges and spikes.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

High Efficiency Helps the Environment and Your Cash Flow

Operating with a high 95% line-mode efficiency, the 1kVA UPS system can save BTU heat output and energy costs.

Advanced Communications Ports Connect to Any Workstation or Server

USB and DB9 ports (cables are included) enable data-saving unattended shutdown when used with Tripp Lite's free downloadable PowerAlert® software. Capabilities include detailed monitoring of equipment load levels, self-test data and utility power condition. The Emergency Power Off (EPO) interface offers options for instantaneous power-off of the UPS system and connected equipment in case of fire or other facility emergency.

Optional Network Management Cards Allow Detailed Monitoring of Conditions

The SMART1000RM2UL is compatible with Tripp Lite network management cards, such as WEBCARDLX, for detailed monitoring of UPS and site power conditions.

Product TypeLine-interactive UPS
Technical Information
AVRYes
Plug/Connector TypeNEMA 5-15P
Receptacle TypeNEMA 5-15R
Receptacle Detail6 x NEMA 5-15R
Transfer Time4 ms
EMI/RFI Noise FilterYes
Application/Usage
  • Server
  • Network
  • Telecommunication
Power Description
Load Capacity (VA)1 kVA
Load Capacity (Watt)800 W
Input Voltage120 V AC
Input Voltage Range83 V AC - 147 V AC
Output Voltage120 V AC
Output Frequency60 Hz
Waveform TypePure Sine Wave
Surge Energy Rating570 J
Management
Alarm
  • Power Failure
  • Low Battery
  • Overload
  • UPS Fault
  • Remote Shutdown
Controls/Indicators
Status Indicators
  • Multi-Function LCD
  • Audible Alarms
Interfaces/Ports
Serial PortYes
EPO PortYes
USB (HID Compliant) PortYes
Battery Information
Battery ChemistryLithium-Ion (LiFePO4)
Backup/Run Time (Full Load)8.30 Minute
Backup/Run Time (Half Load)20 Minute
Typical Battery Recharge Time2.70 Hour
Environmental Conditions
Maximum Operating Temperature104°F (40°C)
Storage Temperature5°F (-15°C) - 122°F (50°C)
Storage Relative Humidity95%
Sound Emission (A-Weighted)45.5 dB(A)
Thermal Dissipation141 BTU/h
Physical Characteristics
Height3.50" (88.90 mm)
Width17.35" (440.69 mm)
Depth12.50" (317.50 mm)
Rack Height2U
Form FactorRack/Tower
Weight (Approximate)16.30 lb (7393.56 g)
Miscellaneous
Package Contents
  • SmartPro SMART1000RM2UL 1kVA Rack/Tower UPS
  • USB Cable
  • DB9 Cable
  • EPO Cable
  • Rack-Mounting Hardware
  • Owner's Manual
Country of OriginChina
Environmentally FriendlyYes
Environmental ComplianceRestriction of Hazardous Substances (RoHS)
ConditionNo
UPC0037332213099
Warranty
Limited Warranty5 Year
connector cables (1)
mounting kits (4)

Part No. 2POSTRMKITWM

Tripp Lite Two Post Rackmount Kit - Steel

FOR 2U 3U SMART PRO ONLINE BP

Part No. 2-9USTAND

Tripp Lite 2-9U Stand - Plastic - Black

FOR 2U TO 9U RACK MOUNT DEVICES

pdus (8)
power cords (10)
remote management adapters (2)