Tripp Lite by Eaton N390-02M-8LC-AP MTP/MPO to 8xLC Singlemode Breakout Patch Cable, Yellow, 2 m

Part No. N390-02M-8LC-AP

by Eaton Corporation

Tripp Lite by Eaton N390-02M-8LC-AP MTP/MPO to 8xLC Singlemode Breakout Patch Cable, Yellow, 2 m

6.6 ft (2.01 m) Fiber Optic Network Cable for Network Device, Switch, Hub, Router - First End: 1 x MTP/MPO Network - Female - Second End: 8 x LC Network - Male - 100 Gbit/s - Patch Cable - Yellow

Part No. N390-02M-8LC-AP

by Eaton Corporation

$368.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberN39002M8LCAP
Brand NameTripp Lite by Eaton
Product ModelN390-02M-8LC-AP
Product NameN390-02M-8LC-AP MTP/MPO to 8xLC Singlemode Breakout Patch Cable, Yellow, 2 m
Marketing InformationThe N390-02M-8LC-AP MTP/MPO to 8xLC Singlemode Breakout Patch Cable supports 40/100 Gb Ethernet speeds and is designed for high-density fiber patching between data center MDFs (main distribution frames) and IDFs (intermediate distribution frames) in enterprise installations. It's optimized for QSFP+ 40GBASE-PLR4 and QSFP28 100GBASE-PSM4 networks. Its plenum-rated jacket makes it ideal for connecting switches, hubs, routers and other high-speed network components in ceilings, walls and ducts.

The 12-fiber MTP/MPO connector is about the same size as an SC connector, but is 12 times denser, freeing up rack space for other cables. The APC connector is angled to prevent infrared light entering the fiber from bouncing back into the laser. The N390-02M-8LC-AP is tested for low insertion loss and back reflection on every connector and attenuation loss that meets or exceeds current standards.

The N390-02M-8LC-AP uses eight fibers to fully transmit 40GBASE-PLR4 with four fibers transmitting at 10 Gbps in each direction. Its slim, space-saving uniboot design allows easier cable management. The LC UPC connector's premium-grade ceramic ferrule is designed for fast applications of 10 GbE and higher.

The singlemode cable is colored yellow for instant identification in a crowded switch or patch panel. Push/pull tab connectors are easily accessible in high-density data center environments and make the plug-and-play cable easy to install and remove with one hand.
Product TypeNetwork Cable
Technical Information
Cable TypeFiber Optic
Cable CharacteristicPatch Cable
Fiber Optic ModeSingle-mode
Fiber Optic Cable Core/Cladding Specification8.3/125 µm
Cable Length6.6 ft (2.01 m)
Connector Type on First EndMTP/MPO Network - Female
Connector on First End Details1 x MTP/MPO Network - Female
Connector Type on Second EndLC Network - Male
Connector on Second End Details8 x LC Network - Male
Device Supported
  • Network Device
  • Switch
  • Hub
  • Router
Data Transfer Rate100 Gbit/s
Features
  • Angled Connector
  • Uniboot Connector
Physical Characteristics
Color FamilyYellow
Product ColorYellow
Miscellaneous
Environmentally FriendlyYes
Environmental ComplianceRestriction of Hazardous Substances (RoHS)
Country of OriginChina
ConditionNo
UPC0037332205582
Warranty
Limited WarrantyLifetime
patch panels (2)