Tripp Lite by Eaton B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub

Part No. B156-003-HD-V2

by Eaton Corporation

Tripp Lite by Eaton B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub

3840 × 2160 - DisplayPort - 3 x HDMI Out

Part No. B156-003-HD-V2

by Eaton Corporation

$139.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberB156-003-HD-V2
Brand NameTripp Lite by Eaton
Product ModelB156-003-HD-V2
Product NameB156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub
Marketing InformationThe B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub connects up to three HDMI monitors to the DisplayPort output on your computer. Ideal for digital signage in schools, churches, conference rooms, trade shows, hotels and retail outlets, this hub allows you to display the same image on all three monitors, extend the desktop across them, or combine all three as one large monitor in video wall mode.The B156-003-HD-V2 is compliant with DisplayPort 1.2 and backward compatible with versions 1.1 and 1.1a with the feature set being limited to that of your equipment. It supports Ultra High Definition (UHD) video resolutions up to 3840 x 2160 (4K x 2K) at 24/30 Hz. In video wall mode, it supports expanded resolutions, such as 5760 x 1080 in a horizontal 1 x 3 monitor configuration or 1920 x 3240 in a vertical 3 x 1 configuration.This MST hub also supports HDCP, EDID, DDC and 48-bit Deep Color (16 bits per channel), as well as DTS-HD, Dolby TrueHD and 7.1-channel surround sound audio. It works with all operating systems. Plug-and-play convenience means no software or drivers are needed. A built-in six-inch cable connects directly to a DisplayPort source. LEDs indicate when the monitors are receiving a signal. The B156-003-HD-V2 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
  • Computer with DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity) required for video wall mode. Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibility with older graphics cards not guaranteed.
  • MST compliant graphics cards are limited to a bandwidth of 21.6 Gbps amongst all monitors, with higher resolution monitors using up more bandwidth. 1080p monitors will use up approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display settings interface for your graphics card. If the total percentage of bandwidth taken up by all of the connected monitors exceeds 100%, an image will not display on one or more of them.

System Requirements

  • Computer with DisplayPort 1.2-compatible graphics card (e.g. AMD Radeon with AMD Eyefinity) required for video wall mode.
  • Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers with feature set limited to that of your equipment. Compatibility with older graphics cards not guaranteed.
  • Mac OS X does not support MST for NVIDIA and Intel Graphics Processor Units, limiting video display on connected monitors to mirror mode.
  • MST compliant graphics cards are limited to a bandwidth of 21.6 Gbps amongst all monitors, with higher resolution monitors using up more bandwidth. 1080p monitors will use up approximately 22% of bandwidth, whereas 4K monitors will use 40% or more. As each monitor will be different, it is necessary to verify the percentage of bandwidth being used by each monitor in the display settings interface for your graphics card. If the total percentage of bandwidth taken up by all of the connected monitors exceeds 100%, an image will not display on one or more of them.
  • Monitor(s) with HDMI input.

    More from the Manufacturer

    Product TypeSignal Splitter
    Video
    Maximum Video Resolution3840 × 2160
    Interfaces/Ports
    DisplayPortYes
    HDMI OutYes
    Number of DisplayPort Inputs1
    Number of HDMI Outputs3
    Power Description
    Input Voltage5 V DC
    Physical Characteristics
    Height0.94" (24 mm)
    Width4.29" (109 mm)
    Depth3" (76.20 mm)
    Weight (Approximate)3.88 oz (110 g)
    Miscellaneous
    Package Contents
    • B156-003-HD-V2 3-Port DisplayPort 1.2 to HDMI MST Hub
    • External Power Supply with NEMA 1-15P Plug and 5 ft. Cord (Input: 100-240V, 50/60 Hz, 0.5A; Output: 5V, 2A)
    • Owner's Manual
    Country of OriginTaiwan
    TAA CompliantYes
    Environmentally FriendlyYes
    Environmental Compliance
    • Restriction of Hazardous Substances (RoHS)
    • Registration, Evaluation, Authorization and Restriction of Chemicals (REACH)
    ConditionNo
    UPC0037332193346
    Warranty
    Limited Warranty3 Year
    connector cables (18)