Tripp Lite by Eaton B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver

Part No. B126-2A0

by Eaton Corporation

Tripp Lite by Eaton B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver

2 Output Device - 200 ft (60960 mm) Range - 1 x Network (RJ-45) - 2 x HDMI Out - Full HD - 1920 x 1080 - Twisted Pair - Rack-mountable, Wall Mountable, Pole-mountable

Part No. B126-2A0

by Eaton Corporation

$232.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberB126-2A0
Brand NameTripp Lite by Eaton
Product ModelB126-2A0
Product NameB126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver
Marketing InformationThe B126-2A0 HDMI over Cat5/Cat6 Active Remote Receiver works with Tripp Lite's B126-002 or B126-004 transmitter to extend an HDMI signal and split it to two projectors, monitors or televisions. It's ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than conventional cables allow or that require multiple displays connected to one source.

The receiver uses HDMI cable (see Tripp Lite's P568-Series) to connect to the monitors and Cat5e/6 cable to receive the signal from the transmitter or a remote repeater in the chain (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series).

The B126-2A0 can extend a 1080i (60 Hz) signal up to 200 feet, a 1080p (60 Hz) signal up to 150 feet and a 3D signal up to 125 feet. You can connect up to three B126-110 remote repeaters in the chain for a maximum of six HDMI displays and full signal extension of 700 feet (1080i), 500 feet (1080p) or 400 feet (3D).

In addition to crystal-clear video, the B126-2A0 delivers full, rich stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter. Built-in equalization control lets you fine-tune the image quality at each remote display. Supports 24-bit True Color (8 bits per channel) and HDCP compatibility. Easy to set up with no software or drivers to install. Mounts to a wall, rack or pole using the included hardware.

Features

Extends High-Definition Signals

  • Works in tandem with Tripp Lite's B126-002 or B126-004 transmitter unit
  • Extends a 1080i (60 Hz) signal up to 200 ft., a 1080p (60 Hz) signal up to 150 ft. and a 3D signal up to 125 ft.
  • Connect up to 3 B126-110 remote repeaters to the chain for maximum signal range of 700 feet (1080i), 500 feet (1080p) and 400 feet (3D)
  • Connects to previous link in the chain with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite's N202-Series)

Supports the Latest Video and Audio Resolutions

  • Works with all operating systems and HDMI video sources
  • Supports HD resolutions up to 1080p (60 Hz)
  • Supports stereo and 7.1-channel surround sound (multi-channel or PCM) audio when paired with a B126-002 or B126-004 transmitter
  • Supports 24-bit True Color (8 bits per channel) and HDCP
  • Built-in equalization control lets you adjust the image on the local monitor

Easy to Set Up and Use

  • Plug-and-play engineering-no software or drivers to download and install
  • Connects quickly to monitors with HDMI cable, such as Tripp Lite's P568-Series
  • LEDs indicate at a glance when the unit is receiving power and a signal from the previous link in the chain
  • Included mounting hardware lets you install the unit on a wall, rack or pole

TAA-Compliant

  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

More from the Manufacturer

Product TypeVideo Extender Receiver
Technical Information
Connectivity TechnologyWired
Number of Output Devices Supported2
Maximum Operating Distance200 ft (60960 mm)
Video
Graphics ModesFull HD
Maximum Video Resolution1920 x 1080
Interfaces/Ports
Network (RJ-45)Yes
HDMI OutYes
Number of Network (RJ-45) Ports1
Number of HDMI Outputs2
Media & Performance
Media Type SupportedTwisted Pair
Twisted Pair Cable StandardCategory 6
Physical Characteristics
Color FamilyBlack
Product ColorBlack
Receiver Height1" (25.40 mm)
Receiver Width2.50" (63.50 mm)
Receiver Depth3.60" (91.44 mm)
Form Factor
  • Rack-mountable
  • Wall Mountable
  • Pole-mountable
Miscellaneous
For Country/Region
  • Europe
  • United Kingdom
Package Contents
  • HDMI Over Cat5 Active Extender 2-Port Remote Unit
  • Screwdriver For Adjustment Of Equalization
  • Mounting Hardware
  • External Power Supply (Input: 100-240V)
Country of OriginTaiwan
TAA CompliantYes
Environmentally FriendlyYes
Environmental ComplianceRestriction of Hazardous Substances (RoHS)
ConditionNo
UPC0037332180728
Warranty
Limited Warranty1 Year
audio & video consoles/extenders (5)
connector cables (11)
mounting kits (1)
video switchboxes (2)