Tripp Lite by Eaton Displayport Multi-Display Splitter/Expander - 2 Port

Part No. B156-002

by Eaton Corporation

Tripp Lite by Eaton Displayport Multi-Display Splitter/Expander - 2 Port

Serial Port

Part No. B156-002

by Eaton Corporation

$312.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberB156-002
Brand NameTripp Lite by Eaton
Product NameDisplayport Multi-Display Splitter/Expander - 2 Port
Marketing InformationGet everyone's attention by broadcasting awesome messages in ultra-high definition video! With Tripp Lite's B156-002 2-Port Multi-Display Video Splitter/Expander, you can split or expand a single DisplayPort signal into two separate signals and display them on two DisplayPort monitors using standard DisplayPort cables (Tripp Lite P580-Series or P583-Series). You can display the same image on each monitor, extend the desktop across them, or display in video wall mode where monitors are combined to display as one, enlarged monitor. The B156-002 supports 4Kx2K Ultra-High Definition (UHD) video resolutions up to 3840x2160 (24 and 30Hz), 48-bit Deep Color (16 bits per channel), and is compatible with HDCP, EDID and DDC. It is compliant with DisplayPort v1.2. It comes with an external power supply and brackets for wall-, rack- or pole-mounting. All mounting hardware is included. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.
  • A computer with a DisplayPort v1.2 compatible Graphics Card (e.g. AMD Radeon with AMD Eyefinity technology) is required to display in video wall mode. Backward compatible with most DisplayPort 1.1a equipment running current graphics drivers, with the feature set being limited to that of your equipment (e.g. you may be limited to displaying in Clone / Mirror mode only). Compatibility with older graphics cards is not guaranteed.
  • Maximum supported video resolutions and number of monitors will be dependent upon your graphics card. Check the specifications of your graphics card to determine its capabilities.
Product TypeSignal Splitter
Interfaces/Ports
Serial PortYes
Number of DisplayPort Inputs1
Number of DisplayPort Outputs2
Power Description
Input Voltage240 V AC
Physical Characteristics
Height1" (25.40 mm)
Width3.60" (91.44 mm)
Depth2.52" (64.01 mm)
Weight (Approximate)1 lb (453.59 g)
Miscellaneous
Package Contents
  • Displayport Multi-Display Splitter/Expander - 2 Port
  • Mounting Hardware
  • External Power Supply (Input: 100-240V, 50/60Hz, 0.5A; Output: 5V, 2A)
Additional Information
  • Supports both 4Kx2K (3840x2160 at 60Hz) UHD video and standard 1080p (1920x1080 at 60Hz) high-definition video
  • Displays can be placed up to 25 ft. away from the splitter/expander; the video source can be up to 16 ft. away from the splitter/expander (6 ft. is recommended).
  • Supports up to 48-bit Deep Color (16 bits per channel) and video resolutions up to 4K Ultra High Definition (UHD), 3840x2160 (60Hz)
  • Supports HDCP, EDID, and DDC
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
Country of OriginTaiwan
TAA CompliantYes
Environmentally FriendlyYes
ConditionNo
UPC037332175878
Warranty
Limited Warranty3 Year
connector cables (9)
kvm switchboxes (1)
mounting kits (1)
signal splitters/amplifiers (2)

Part No. B156-002-DVI

Tripp Lite by Eaton Displayport to 2 X DVI Splitter - 2 Port - DisplayPort - DVI Out

2-Port DisplayPort 1.2 to DVI Multi-Stream Transport (MST) Hub, 3840x1200 at 60Hz, TAA