Tripp Lite series SmartPro SMART2200RM2UN 2200VA Rack-mountable UPS

Part No. SMART2200RM2UN

by Eaton Corporation

Tripp Lite series SmartPro SMART2200RM2UN 2200VA Rack-mountable UPS

2U Rack-mountable - 4.50 Hour Recharge - 4.50 Minute Stand-by - 110 V AC Input - 120 V AC Output - Serial Port - USB - 4 x NEMA 5-15R, 4 x NEMA 5-15/20R Receptacle(s) - SNMP Manageable

Part No. SMART2200RM2UN

by Eaton Corporation

$2247.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberSMART2200RM2UN
Brand NameTripp Lite series
Product LineSmartPro
Product ModelSMART2200RM2UN
Product NameSmartPro SMART2200RM2UN 2200VA Rack-mountable UPS
Marketing Information1.95kVA/1.95kW/120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments

This rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your valuable IT equipment or destroy data. The SMART2200RM2UN is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.

Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages

The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting.

Pre-Installed LX Platform Network Management Card Allows Remote Access 24/7

The WEBCARDLXE network interface enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.

NEMA 5-20R Outlets Protect Your Connected Components

One L5-20R and six managed 5-20R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.

Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions

AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART2200RM2UN maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring

The two-line front-panel LCD monitoring screen features ten selectable screens that allow quick access to a wide range of detailed UPS and site power information. LEDs show UPS status: a green light means utility power is on, an orange light means the UPS is in battery mode and a red light indicates an active alarm or fault. The control panel rotates to accommodate both rack-mount and tower configurations.

Product TypeLine-interactive UPS
Technical Information
Plug/Connector TypeNEMA 5-20P
Receptacle Type
  • NEMA 5-15R
  • NEMA 5-15/20R
Receptacle Detail
  • 4 x NEMA 5-15R
  • 4 x NEMA 5-15/20R
Emergency Power OFFYes
Transfer Time5 ms
Power Description
Load Capacity (VA)1.95 kVA
Load Capacity (Watt)1.95 kW
Input Voltage110 V AC
Output Voltage120 V AC
Management
Network ManagementSNMP Manageable
Interfaces/Ports
Serial PortYes
USBYes
Battery Information
Backup/Run Time (Full Load)4.50 Minute
Backup/Run Time (Half Load)12 Minute
Typical Battery Recharge Time4.50 Hour
Hot SwappableYes
Physical Characteristics
Height3.50" (88.90 mm)
Width17.50" (444.50 mm)
Depth23.70" (601.98 mm)
Rack Height2U
Form FactorRack-mountable
Weight (Approximate)57.60 lb (26126.92 g)
Miscellaneous
Package Contents
  • SmartPro SMART2200RM2UN 2.2kVA Rack-mountable UPS
  • PowerAlert Software CD
  • USB Cable
  • Serial Cable
  • EPO Cable
  • 4 Post Rackmount Installation kit
  • Instruction Manual
  • Network Interface Card
Certifications & Standards
  • UL1778
  • CSA
  • NOM
  • FCC Part 15 Category A (EMI)
Software IncludedPowerAlert Software
Country of OriginChina
ConditionNo
UPC0037332178015
Warranty
Limited Warranty3 Year
mounting kits (4)

Part No. 2POSTRMKITWM

Tripp Lite Two Post Rackmount Kit - Steel

FOR 2U 3U SMART PRO ONLINE BP

Part No. 2-9USTAND

Tripp Lite 2-9U Stand - Plastic - Black

FOR 2U TO 9U RACK MOUNT DEVICES

pdus (9)
proximity sensors (1)

Part No. SRSWITCH

Tripp Lite SRSWITCH Magnetic Door Switch Kit - Door

FRONTREAR DOORS REQ ENVIROSENSE

temperature & humidity sensors (2)

Part No. E2MTDO

Tripp Lite by Eaton E2MTDO EnviroSense2 Environmental Sensor Module - TAA Compliant

TEMPERATURE MNTRNGDIGITAL OUTPUTS

Part No. ENVIROSENSE

Tripp Lite ENVIROSENSE Environmental Sensor - TAA Compliant

HUMIDITY/INPUTS REQUIRES SNMPCARD

ups batteries (1)