Tripp Lite by Eaton SmartPro 1500RM2U UPS

Part No. SMART1500RM2U

by Eaton Corporation

Tripp Lite by Eaton SmartPro 1500RM2U UPS

2U Rack-mountable - 4 Hour Recharge - 4.50 Minute Stand-by - 110 V AC Input - 120 V AC Output - USB - 8 x NEMA 5-15R Receptacle(s) - SNMP/Webcard

Part No. SMART1500RM2U

by Eaton Corporation

$1184.99
General Information
ManufacturerEaton Corporation
Manufacturer Part NumberSMART1500RM2U
Brand NameTripp Lite by Eaton
Product LineSmartPro
Product NameSmartPro 1500RM2U UPS
Marketing Information

Protects Mission-Critical Rack-Mounted Equipment

  • Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
  • Audible alarm signals loss of utility power, overload, low battery and fault conditions
  • 8 NEMA 5-15R outlets
  • 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
  • 0.9 power factor rating
  • 570-joule surge suppression rating


Reliable Battery Backup

  • Supports half load up to 13 min. and full load up to 4.5 min.
  • Internal batteries designed for hot-swap field replacement
  • 95% line-power efficiency rating saves money in energy costs


2 Load Banks with Switchable Outlets

  • Can control 4 outlets remotely to reboot equipment or shed nonessential loads


Automatic Voltage Regulation (AVR)

  • Maintains 120V nominal output over input range of 83V-147V without using battery power


EMI/RFI Line Noise Filtering

  • Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance


Interactive LCD Screen

  • Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes
  • Rotates for easy viewing in rack-mount or tower configurations


Network Management Cards

  • Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD


Communications Ports

  • USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from
  • EPO">www.tripplite.com/poweralert port supports emergency shutdown in large facilities

  • EPO">
    Versatile Installation Options

  • EPO">
    • Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack
    • Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory
    • Mounts in upright tower position with optional 2-9USTAND accessory
  • EPO">
Packaged Quantity1 Each
Product TypeLine-interactive UPS
Technical Information
Plug/Connector TypeNEMA 5-15P
Receptacle TypeNEMA 5-15R
Receptacle Detail8 x NEMA 5-15R
Overload ProtectionYes
Emergency Power OFFYes
Cord Length10 ft (3.05 m)
Transfer Time4 ms
Power Description
Load Capacity (VA)1.50 kVA
Load Capacity (Watt)1.35 kW
Input Voltage110 V AC
Output Voltage120 V AC
Waveform TypeSine Wave
Surge Energy Rating570 J
Management
Network ManagementSNMP/Webcard
Alarm
  • On Battery
  • Overload
  • Low Battery
Controls/Indicators
Status IndicatorsLED Indicator
Interfaces/Ports
USBYes
Total Number of Expansion Slots1
Battery Information
DC System Voltage36 V DC
Battery CharacteristicsValve-regulated
Battery ChemistryLead Acid
Backup/Run Time (Full Load)4.50 Minute
Backup/Run Time (Half Load)13 Minute
Battery Life6 Year
Typical Battery Recharge Time4 Hour
Hot SwappableYes
Replaceable BatteryYes
Environmental Conditions
Maximum Operating Temperature104°F (40°C)
Storage Temperature5°F (-15°C) - 122°F (50°C)
Maximum Operating Elevation6561.68 ft (2000000 mm)
Storage Relative Humidity0% - 95%
Sound Emission (A-Weighted)45 dB(A)
Thermal Dissipation267 BTU/h
Physical Characteristics
Height3.50" (88.90 mm)
Width17.50" (444.50 mm)
Depth13.45" (341.63 mm)
Rack Height2U
Form FactorRack-mountable
Weight (Approximate)46 lb (20865.25 g)
Miscellaneous
Package Contents
  • SmartPro 1500RM2U UPS
  • Mounting hardware for 4 post rackmount installation
  • Cabling for USB & DB9 monitoring and EPO switching
  • PowerAlert unattended shutdown and UPS/Power monitoring software
  • Warranty information
Additional Information
  • SMART1500RM2U line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network grade AC surge suppression
  • 1500VA / 1350 watt power handling ability and full time sine wave output offers guaranteed compatibility with properly sized networking, telecom and other sensitive electronic devices
  • Supports 2U rackmount installation in 4 post rack enclosures with included mounting accessories, 2 post mountable with optional 2POSTRMKIT accessory, upright tower installation supported with optional
  • 2-9USTAND accessory
  • Large internal batteries offer runtimes of 25 minutes at half load (750VA / 500 watts) and 10 minutes at full load (1500VA / 1350 watts)
  • Maintains regulated 120V nominal output during brownouts and overvoltages from 83 to 147V
  • Includes 8 UPS-supported outlets arranged in 2 individually controllable load banks (2 outlets per bank)
  • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
  • Offers simultaneous monitoring by up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additoinal UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise management software is also available for select opportunities
  • Communications ports support messaging of UPS and line power status, including on battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
  • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected devices
  • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW)
  • Built-in accessory slot supports SNMP with optional SNMPWEBCARD adapter
  • Emergency Power Off (EPO) interface with cable
  • Multi-function audible alarms and set of 5 front panel LEDs
  • Network-grade AC surge suppression
  • Attractive all-black color scheme
  • UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
  • This unit has an LCD screen
  • Two year warranty with $250,000 connected equipment insurance (USA & Canada only)
Certifications & StandardsUL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
RecycledNo
Country of OriginChina
Environmentally FriendlyYes
Environmental ComplianceRestriction of Hazardous Substances (RoHS)
ConditionNo
UPC0037332119209
Warranty
Limited Warranty3 Year
mounting kits (4)

Part No. 2POSTRMKITWM

Tripp Lite Two Post Rackmount Kit - Steel

FOR 2U 3U SMART PRO ONLINE BP

Part No. 2-9USTAND

Tripp Lite 2-9U Stand - Plastic - Black

FOR 2U TO 9U RACK MOUNT DEVICES

Part No. 4POSTRAILKIT

Tripp Lite 4POSTRAILKIT Rack Mount Rail Kit - 113kg

INSTALLATION OF SELECT RM UPS SYST

pdus (10)
power cords (9)
remote management adapters (3)

Part No. MODBUSCARD

Tripp Lite by Eaton MODBUSCARD Remote Power Management Adapter - Serial

RS-422/485 RS-232 PORTS

temperature & humidity sensors (1)

Part No. ENVIROSENSE

Tripp Lite ENVIROSENSE Environmental Sensor - TAA Compliant

HUMIDITY/INPUTS REQUIRES SNMPCARD

ups batteries (2)

Part No. BP24V15RT2U

Tripp Lite BP24V15RT2U UPS External Battery Pack - 24V DC - Lead Acid

PACK F/ ALL COMPATIBLE UPS

Part No. TL5SW5Y-1750UC

Eaton UPS Advanced Exchange - 5 Year - Service - Exchange

SMART SMX