Tripp Lite SmartPro Tower 1050SLT UPS

1050VA/670W - 6 Minute Full Load - 8 x NEMA 5-15R

Part No. SMART1050SLT

$791.99

General Information

Manufacturer	Eaton Corporation
Manufacturer Part Number	SMART1050SLT
Brand Name	Tripp Lite by Eaton
Product Line	SmartPro
Product Name	SMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS
Marketing Information	Protects Mission-Critical Equipment Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks Audible alarm signals loss of utility power, low battery or overload 8 NEMA 5-15R outlets 6 ft. power cord with 120V NEMA 5-15P input 690-joule surge suppression rating Reliable Battery Backup Supports half load up to 19 min. and full load up to 7 min. Internal batteries designed for hot-swap field replacement 95% line-power efficiency rating saves money in energy costs Cold-start capability enables turn-on in battery mode during blackouts Automatic Voltage Regulation (AVR) Maintains selectable 100V, 110V or 120V nominal output over input range of 83V-145V without using battery power EMI/RFI Line Noise Filtering Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance LED Indicators Front-panel LEDs signal indicate line power, battery power, overload, voltage regulation and battery status Network Management Cards Compatible with Tripp Lite UPS management card options WEBCARDLX, SNMPWEBCARD and RELAYIOCARD Communication Ports USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert Telephone/Network Jacks Protect against power surges over telephone/DSL or network Ethernet lines
Product Type	Line-interactive UPS

Technical Information

Plug/Connector Type	NEMA 5-15P
Receptacle Type	NEMA 5-15R
Receptacle Detail	8 x NEMA 5-15R
Cord Length	6 ft (1.83 m)

Power Description

Load Capacity (VA)	1.05 kVA
Load Capacity (Watt)	650 W
Input Voltage	100 V AC 110 V AC 120 V AC
Output Voltage	100 V AC 110 V AC 120 V AC
Waveform Type	Sine Wave

Management

Network Management	SNMP Manageable
Alarm	On Battery Overload

Controls/Indicators

Status Indicators	Includes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator.

Interfaces/Ports

USB	Yes
Total Number of Expansion Slots	1

Battery Information

Battery Chemistry	Lead Acid
Backup/Run Time (Full Load)	7 Minute
Backup/Run Time (Half Load)	19 Minute
Battery Life	6 Year
Typical Battery Recharge Time	4 Hour
Hot Swappable	Yes

Environmental Conditions

Maximum Operating Temperature	104°F (40°C)

Physical Characteristics

Height	10.20" (259.08 mm)
Width	6.80" (172.72 mm)
Depth	13.20" (335.28 mm)
Form Factor	Tower
Weight (Approximate)	43 lb (19504.47 g)

Miscellaneous

Package Contents	SMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS USB cable DB9 cable PowerAlert software Owner's manual
Additional Information	SMART1050SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression 1050VA / 650 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices Large internal batteries offer runtimes of 19 minutes at half load (525VA / 325 watts) and 7 minutes at full load (1050VA / 650 watts) Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91-145V Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands Offers simultaneous monitoring of up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCHDOGSW) 15 LEDs offer continuous detailed status information of UPS operating parameters and site power quality Hot-swappable batteries allow on-site battery replacement without powering off connected equipment UL (USA), cUL (Canada), NOM (Mexico), FCC Class B (Emissions) Listed 2 year warranty with up to $250,000 connected equipment insurance
Certifications & Standards	UL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications
Country of Origin	China
Condition	No
UPC	0037332119902